Musical Instrument String Anchor bridge pin replacement
Your quickest connection to great tone
Home
 
How It Works
 
Artists
 
Video
 
Buy
 
About Us
Compatibility
 
Installation
 
Contact

String Installation with QuickString®

1. Insert the ball end into the top of the string hole for the string you have selected until the ball just passes the bottom of the QuickString® Fingers (about 1” deep from the top of the string hole).

2. Tilt the string away from the neck and aim it at the string slot between the Fingers in the anchor bracket while also pulling up on the string until you feel it “anchor” against the bridge plate.

3. Pull the string toward the neck while maintaining tension on it. Now thread the other end of the string through the tuning machine as you normally would, and wind it until the slack is taken out of it.

4. Stretch the strings & tune up to play as you normally would.

For string removal, reverse the process.

       

Here's what it looks like inside the guitar.

 

String Installation & Removal with QuickString

© 2009 - 2016 by QuickString®, Inc. All Rights Reserved. Unauthorized reproduction is prohibited. QuickString® is a registered trademark of QuickString®, Inc.